This tool is necessary in order to update the firmware of the secoder.
The reason I've added this to a separate output "tools" is because it
clearly is not relevant for the PCSC driver itself and it's also very
rarely needed.
I've also verified wether the closure of the PCSC plugin env still only
contains the main output and that's the case.
There are also other tools - cjBingoTest and cjgeldkarte, where the
former doesn't compile due to cjeca32.h not being found and cjgeldkarte,
which does compile but tries to dlopen() the library and subsequently
fails.
Both of these tools however look like they're just performing tests and
are not very useful outside of development, so I opted to not include
them.
Signed-off-by: aszlig <aszlig@nix.build>
3.99.5_SP12:
* Add support for cyberJack one MF
3.99.5_SP11:
* Add support for cyberJack one
3.99.5_SP10:
* Add support for SHUReader and SISReader
* Update to the Reiner-SCT repository rev cyberJack@1305
Signed-off-by: aszlig <aszlig@nix.build>
Create a many-layered Docker Image.
Implements much less than buildImage:
- Doesn't support specific uids/gids
- Doesn't support runninng commands after building
- Doesn't require qemu
- Doesn't create mutable copies of the files in the path
- Doesn't support parent images
If you want those feature, I recommend using buildLayeredImage as an
input to buildImage.
Notably, it does support:
- Caching low level, common paths based on a graph traversial
algorithm, see referencesByPopularity in
0a80233487993256e811f566b1c80a40394c03d6
- Configurable number of layers. If you're not using AUFS or not
extending the image, you can specify a larger number of layers at
build time:
pkgs.dockerTools.buildLayeredImage {
name = "hello";
maxLayers = 128;
config.Cmd = [ "${pkgs.gitFull}/bin/git" ];
};
- Parallelized creation of the layers, improving build speed.
- The contents of the image includes the closure of the configuration,
so you don't have to specify paths in contents and config.
With buildImage, paths referred to by the config were not included
automatically in the image. Thus, if you wanted to call Git, you
had to specify it twice:
pkgs.dockerTools.buildImage {
name = "hello";
contents = [ pkgs.gitFull ];
config.Cmd = [ "${pkgs.gitFull}/bin/git" ];
};
buildLayeredImage on the other hand includes the runtime closure of
the config when calculating the contents of the image:
pkgs.dockerTools.buildImage {
name = "hello";
config.Cmd = [ "${pkgs.gitFull}/bin/git" ];
};
Minor Problems
- If any of the store paths change, every layer will be rebuilt in
the nix-build. However, beacuse the layers are bit-for-bit
reproducable, when these images are loaded in to Docker they will
match existing layers and not be imported or uploaded twice.
Common Questions
- Aren't Docker layers ordered?
No. People who have used a Dockerfile before assume Docker's
Layers are inherently ordered. However, this is not true -- Docker
layers are content-addressable and are not explicitly layered until
they are composed in to an Image.
- What happens if I have more than maxLayers of store paths?
The first (maxLayers-2) most "popular" paths will have their own
individual layers, then layer #(maxLayers-1) will contain all the
remaining "unpopular" paths, and finally layer #(maxLayers) will
contain the Image configuration.
Using a simple algorithm, convert the references to a path in to a
sorted list of dependent paths based on how often they're referenced
and how deep in the tree they live. Equally-"popular" paths are then
sorted by name.
The existing writeReferencesToFile prints the paths in a simple
ascii-based sorting of the paths.
Sorting the paths by graph improves the chances that the difference
between two builds appear near the end of the list, instead of near
the beginning. This makes a difference for Nix builds which export a
closure for another program to consume, if that program implements its
own level of binary diffing.
For an example, Docker Images. If each store path is a separate layer
then Docker Images can be very efficiently transfered between systems,
and we get very good cache reuse between images built with the same
version of Nixpkgs. However, since Docker only reliably supports a
small number of layers (42) it is important to pick the individual
layers carefully. By storing very popular store paths in the first 40
layers, we improve the chances that the next Docker image will share
many of those layers.*
Given the dependency tree:
A - B - C - D -\
\ \ \ \
\ \ \ \
\ \ - E ---- F
\- G
Nodes which have multiple references are duplicated:
A - B - C - D - F
\ \ \
\ \ \- E - F
\ \
\ \- E - F
\
\- G
Each leaf node is now replaced by a counter defaulted to 1:
A - B - C - D - (F:1)
\ \ \
\ \ \- E - (F:1)
\ \
\ \- E - (F:1)
\
\- (G:1)
Then each leaf counter is merged with its parent node, replacing the
parent node with a counter of 1, and each existing counter being
incremented by 1. That is to say `- D - (F:1)` becomes `- (D:1, F:2)`:
A - B - C - (D:1, F:2)
\ \ \
\ \ \- (E:1, F:2)
\ \
\ \- (E:1, F:2)
\
\- (G:1)
Then each leaf counter is merged with its parent node again, merging
any counters, then incrementing each:
A - B - (C:1, D:2, E:2, F:5)
\ \
\ \- (E:1, F:2)
\
\- (G:1)
And again:
A - (B:1, C:2, D:3, E:4, F:8)
\
\- (G:1)
And again:
(A:1, B:2, C:3, D:4, E:5, F:9, G:2)
and then paths have the following "popularity":
A 1
B 2
C 3
D 4
E 5
F 9
G 2
and the popularity contest would result in the paths being printed as:
F
E
D
C
B
G
A
* Note: People who have used a Dockerfile before assume Docker's
Layers are inherently ordered. However, this is not true -- Docker
layers are content-addressable and are not explicitly layered until
they are composed in to an Image.
/cc @Ericson2314
PR was https://github.com/NixOS/nixpkgs/pull/46857
This line broke MacOS cross compilation. paxctl cannot be built on
macOS. Maybe it can be fixed, but no reason to break things
unnecessarily.
Regardless, you definitely need to be more careful about backporting.
I think it’s fine to move fast and break things on master but
with release-18.09 we should be more careful. Something like more
automated testing for cross compilation would also be
helpful (hopefully even making it block).
(cherry picked from commit f9c4075873cb56464126f993d22a1a72f7cfac45)
/cc @Ericson2314
This line broke MacOS cross compilation. paxctl cannot be built on
macOS. Maybe it can be fixed, but no reason to break things
unnecessarily.
Regardless, you definitely need to be more careful about backporting.
I think it’s fine to move fast and break things on master but
with release-18.09 we should be more careful. Something like more
automated testing for cross compilation would also be
helpful (hopefully even making it block).
Changes the evaluation order in that it evaluates assertions before
warnings, so that eg. the following would work:
{ config, lib, ... }:
{
options.foo = lib.mkOption {
type = lib.types.bool;
default = true;
description = "...";
};
options.bar = lib.mkOption {
type = lib.types.bool;
default = false;
description = "...";
};
config = lib.mkMerge [
(lib.mkIf config.bar {
system.build.bar = "foobar";
})
(lib.mkIf config.foo {
assertions = lib.singleton {
assertion = config.bar;
message = "Bar needs to be enabled";
};
systemd.services.foo = {
description = "Foo";
serviceConfig.ExecStart = config.system.build.bar;
};
})
];
}
This is because the systemd module includes definitions for warnings
that would trigger evaluation of the config.system.build.bar definition.
The original pull request references a breakage due to the following:
{
services.nixosManual.enable = false;
services.nixosManual.showManual = true;
}
However, changing the eval order between asserts and warnings clearly is
a corner case here and it only happens because of the aforementioned
usage of warnings in the systemd module and needs more discussion.
Nevertheless, this is still useful because it lowers the evaluation time
whenever an assertion is hit, which is a hard failure anyway.
