diff --git a/nixos/modules/module-list.nix b/nixos/modules/module-list.nix
index 44e0deb68dae..fb773e97f7ef 100644
--- a/nixos/modules/module-list.nix
+++ b/nixos/modules/module-list.nix
@@ -1942,6 +1942,7 @@
   ./system/boot/unl0kr.nix
   ./system/boot/uvesafb.nix
   ./system/boot/zram-as-tmp.nix
+  ./system/boot/zswap.nix
   ./system/etc/etc-activation.nix
   ./system/service/systemd/system.nix
   ./system/service/systemd/user.nix
diff --git a/nixos/modules/system/boot/zswap.nix b/nixos/modules/system/boot/zswap.nix
new file mode 100644
index 000000000000..bc5c3d97159a
--- /dev/null
+++ b/nixos/modules/system/boot/zswap.nix
@@ -0,0 +1,182 @@
+# Zswap - Compressed Cache for Swap Pages
+#
+# Reference documentation:
+# - https://docs.kernel.org/admin-guide/mm/zswap.html
+# - https://www.kernel.org/doc/html/v6.1/admin-guide/mm/zswap.html
+#
+# IMPORTANT: When modifying this file, ensure that boot.kernel.sysfs configuration
+# remains consistent with kernel parameters configuration. The sysfs settings provide
+# runtime management while kernel parameters ensure early-boot availability.
+
+{ config, lib, ... }:
+
+with lib;
+
+let
+  cfg = config.boot.zswap;
+
+  # Get the current configured kernel version string
+  kernelVersion = config.boot.kernelPackages.kernel.version;
+
+  # Check if kernel supports zsmalloc as zswap backend (>= 6.3)
+  zsmallocSupported = versionAtLeast kernelVersion "6.3";
+in
+{
+  options.boot.zswap = {
+    enable = mkEnableOption "Zswap (Compressed Cache for Swap Pages)";
+
+    compressor = mkOption {
+      type = types.enum [
+        "zstd"
+        "lz4"
+        "lzo"
+        "lz4hc"
+        "deflate"
+        "842"
+      ];
+      default = "zstd";
+      description = ''
+        Compression algorithm to use for zswap.
+
+        Available options:
+        - 'zstd': Best compression ratio, excellent for Nix builds (default)
+        - 'lz4': Fastest compression, lowest latency
+        - 'lz4hc': High-compression variant of lz4, slower but better ratio
+        - 'lzo': Good balance of speed and compression (kernel default)
+        - 'deflate': Higher compression, slower processing
+        - '842': Hardware-accelerated compression on supported systems
+
+        Note: The chosen algorithm must be supported by your kernel configuration.
+      '';
+    };
+
+    zpool = mkOption {
+      type = types.enum [
+        "zsmalloc"
+        "zbud"
+      ];
+      default = if zsmallocSupported then "zsmalloc" else "zbud";
+      defaultText = literalExpression "if kernel >= 6.3 then \"zsmalloc\" else \"zbud\"";
+      description = ''
+        Kernel zpool allocator.
+        'zsmalloc' is strongly recommended for kernels >= 6.3 as it offers the best density.
+        For older kernels, 'zbud' is the fallback.
+
+        Note: 'z3fold' was removed from Linux kernel 6.8 and later.
+      '';
+    };
+
+    maxPoolPercent = mkOption {
+      type = types.ints.between 1 100;
+      default = 25;
+      description = ''
+        The maximum percentage of system memory that Zswap can occupy (1-100).
+
+        Higher values provide more compression cache but increase memory pressure.
+        Default is 25% (higher than kernel default of 20%) for better Nix build performance.
+
+        Recommended ranges:
+        - Desktop systems: 15-25%
+        - Low-memory systems: 30-50%
+        - Server systems: 10-20%
+      '';
+    };
+
+    acceptThresholdPercent = mkOption {
+      type = types.ints.between 1 100;
+      default = 90;
+      description = ''
+        Threshold percentage at which zswap starts accepting pages again after the pool becomes full (1-100).
+
+        This parameter provides hysteresis to prevent pool oscillation.
+        When the pool usage drops below this threshold, zswap starts accepting new pages.
+        Default is 90% as recommended by kernel documentation.
+      '';
+    };
+
+    shrinkerEnabled = mkOption {
+      type = types.bool;
+      default = true;
+      description = ''
+        Enable the zswap shrinker to reclaim memory when under pressure.
+
+        When enabled, the shrinker will automatically reclaim compressed pages
+        from the zswap pool when the system is under memory pressure, helping
+        to prevent out-of-memory situations.
+
+        It is recommended to keep this enabled for most workloads, especially
+        on systems with limited memory.
+      '';
+    };
+  };
+
+  config = mkIf cfg.enable {
+    # 1. Core configuration: kernel parameters for early boot
+    boot.kernelParams = [
+      "zswap.enabled=1"
+      "zswap.compressor=${cfg.compressor}"
+      "zswap.zpool=${cfg.zpool}"
+      "zswap.max_pool_percent=${toString cfg.maxPoolPercent}"
+      "zswap.accept_threshold_percent=${toString cfg.acceptThresholdPercent}"
+      "zswap.shrinker_enabled=${if cfg.shrinkerEnabled then "1" else "0"}"
+    ];
+
+    # 2. Dependency management: ensure required modules are included in initrd or kernel
+    # This ensures Zswap is ready early in the boot process (before swap is mounted)
+    boot.initrd.kernelModules = [
+      cfg.compressor
+      cfg.zpool
+    ];
+
+    # 3. Runtime configuration using boot.kernel.sysfs
+    # This ensures zswap parameters are properly set and maintained during system rebuilds
+    boot.kernel.sysfs.module.zswap.parameters = {
+      enabled = true;
+      compressor = cfg.compressor;
+      zpool = cfg.zpool;
+      max_pool_percent = cfg.maxPoolPercent;
+      accept_threshold_percent = cfg.acceptThresholdPercent;
+      shrinker_enabled = true;
+    };
+
+    assertions = [
+      {
+        assertion = !config.zramSwap.enable;
+        message = ''
+          Conflicting options enabled: 'boot.zswap.enable' and 'zramSwap.enable'.
+
+          You cannot enable Zswap and Zram simultaneously as it leads to double compression
+          and inefficient memory management.
+
+          Please disable one of them:
+            - To use Zswap (requires a physical swap device): Set 'zramSwap.enable = false'.
+            - To use Zram (swap in RAM): Set 'boot.zswap.enable = false'.
+        '';
+      }
+      {
+        assertion = config.swapDevices != [ ];
+        message = ''
+          Zswap requires at least one physical swap device to function as a backing store.
+
+          Try adding the following to your configuration (example):
+
+          swapDevices = [ {
+            device = "/var/lib/swapfile";
+            size = 16 * 1024; # 16GB
+          } ];
+        '';
+      }
+      {
+        assertion = (cfg.zpool == "zsmalloc") -> zsmallocSupported;
+        message = ''
+          Zswap allocator 'zsmalloc' is not supported on kernel version ${kernelVersion}.
+          Support for zsmalloc in Zswap was added in Linux 6.3.
+
+          Please use 'zbud' instead: boot.zswap.zpool = "zbud";
+        '';
+      }
+    ];
+  };
+
+  meta.maintainers = with lib.maintainers; [ luochen1990 ];
+}